One Earth Concrete, Tile & Grout Brightener
CTG is an acid-based cleaner for use in the One Earth hard surface cleaning system. This product quickly removes rust stains and hard water scale and brightens cement-based grout lines. If you use the CTG to clean your tough to get grout, ceramic, porcelain and other hard, nonporous services you will be leaving your surfaces free from residue.
FOR PROFESSIONAL USE ONLY. CONCENTRATE. MUST BE DILUTED FOR USE.DIRECTIONS: Mix 3 ounces of concentrate with enough water to make one gallon of ready to use (RTU) solution. (24 mL / L). Use cold tap water to prepare the RTU solution. PREINSPECTION: Examine the surface for evidence of pre-existing damage and for stains and soiling that will not be possible to remove. WORK PROCESS: 1) Post wet floor signs. Protect areas not being cleaned from overspray. 2) Use a pressure sprayer to apply RTU solution to the surface. Use a coarse spray and do not generate aerosol. Allow a 5 to 10 minute dwell time but do not allow solution to dry on the surface. 3) For floors, use a rotary buffer with a nylon grit brush to agitate surface. For counter tops and vertical surfaces, use a hand brush to agitate the surface. 4) Use high pressure water to power wash the surface. Be sure to vacuum all waste water. Inspect surface for standing water and remove. 5) If soil removal or degreasing is required, use Chemspec One Earth™ Heavy Duty Cleaner/Degreaser. Follow the label directions for this product. 6) Establish good drying conditions.