This product has a Low pH, low Odor, and a low foaming cleaner that effectively removes hard water scale and rust stains from concrete, tile and grout and brightens up your surfaces
Examine the surface for evidence of pre-existing damage and for stains and soiling that will not be possible to remove. Check for and remove any coatings. These coatings will interfere with proper cleaning.
1) Post wet floor signs. Protect areas not being cleaned from overspray.2) Use a pressure sprayer to apply RTU solution to the surface. Use a coarse spray and do not generate aerosol. Allow a 5-10 minute dwell time but do not allow solution to dry on the surface.3) For floors, use a rotary buffer with a nylon grit brush to agitate surface. For counter tops and vertical surfaces, use a hand brush to agitate the surface.4) Use high pressure water at as high a temperature as possible to pressure wash the surface. Be sure to vacuum all waste water. Inspect surface for standing water and remove.5) Repeat steps 2, 3, & 4 using Versaclean Overhaul Concrete, Stone, and Tile Cleaner. Follow the label directions for this product.
6) Establish good drying conditions.